Click Here to Contact Us
x

Contact Form

Fuel and Engine Treatments // Workshop

ROX® Engine Flush
  • Removes engine sludge
  • Reduces fresh oil contaminants
  • Frees sticky valves and hydraulic lifters
  • Will not harm oil seals or gaskets
  • Cleans the engine internally
  • Frees piston rings and restores engine compression
  • Extends life of new oil
  • Improves engine efficiency

Description

When heat generated from the engine’s normal operation combines with the deposits a sludge is formed, this sludge build-up can cause significant damage to the engine’s internal surfaces. Engine flush removes contaminant deposits from the internal surfaces, which cause damage to camshafts, pistons, bearings and crankshafts. It provides a clean environment to protect new oil from immediate contamination. This prolongs the life of the detergent, anti-oxidant and dispersant additives in the new oil. The use of engine flush at every oil change will extend engine life and enhance performance.

Directions for Use

Ensure the engine is not running, add contents (350ml) to crankcase. Idle engine for 5 to 15 minutes, turn engine off and drain crankcase while oil is still hot. Replace oil plug, install new filter and add new oil.

First Aid

In case of eye contact flush thoroughly with water for at least 15 minutes. If swallowed do NOT induce vomiting. Give a glass of water to drink. If on skin, wash with soap and water. Contact a Doctor or Poisons Information Centre Australia 131 126, New Zealand 0800 764 766.

Safety Instructions

Caution: Combustible - do not use near heat or open flame. Keep out of reach of children.

Ordering Info

 Item Code:  Size
 8290/300  300mL
 8290/30  1L
 8266/42  5L
 8266/51 20L