Click Here to Contact Us
x

Contact Form

Products // Paint Strippers

CH8930
Non-flammable phenolic paint stripper
  • Non-flammable phenolic paint stripper
  • Removes epoxy and 2 pack coatings, including primer and base coats
  • Heavy bodied, viscous material - clings to vertical and inverted surfaces
  • Non-corrosive to aluminium, cadmium, high strength steel and all aircraft metal surfaces

Description

Callington CH8930 is a thickened non-flammable, phenolic paint stripper for the removal of epoxy, polyurethane and other chemically resistant coatings, including primers and base coats on aircraft surfaces.

Directions for use

Precaution: CH8930 is damaging to acrylics, most plastics, and composites. Avoid contact to prevent damage.

1. Clean any soiled or oily surfaces prior to stripping.
2. Mask off all Perspex, plastic and rubber components.
3. To avoid unnecessary evaporation, carry out stripping operation away from direct sunlight or wind.
4. Apply CH8930 by spray or brush. For spraying, use a Graco barrel pump or equivalent.
5. Once paint film has blistered, agitate area with stiff bristle brush if necessary and then rinse off with high pressure water or scrape and rinse off.

Approvals

• Boeing BSS7432
• AMS 1375B
• Douglas CSD1, Type III
• MIL-PRF-25134C
• MIL-R-81294B
• Bell 00303040

Physical Properties

Density: 1.19 ± 0.01 g/mL
Colour: Light Amber to Brown
Transparency: Translucent to Opaque
Viscosity at 20°C: 75 ± 15 Ps (Spindle #5, 20 rpm)

Ordering Info

CodePackaging 
6600/51 20L  
6600/64 200L