Handheld UV LED Lights

Wide selection of compact but extremely durable handheld UV LED lights with waterproof characteristics and high IP class. IP class varies from IP66 (totally protected against dust and low pressure water jets) to IP68 (totally protected against dust and long periods of immersion under pressure), depending on your choice of a model.

Our handheld portfolio consists of Explosion proof UV LED lights such as Hercules Ex, UV LED lights with unusually large beams such as BB 2.0 Series, UV LED lights that can hold aerosols such as MB 3.0 Series and more.  All Labino handheld UV LED lights are penetrant resistant. Our handheld UV lights produce a large and uniform beam size and UV intensities to satisfy all internal requirements of PRIMES, such as Rolls-Royce RRES 90061, Airbus AITM6-1001 – we have a light for everyone. All models are in compliance with ASTM E3022-18.

Please be advised that generic UV lights that have several UV LEDs mounted within a few millimeters from one another in a small housing create an excessive amount of heat which significantly shortens the life of the LEDs. Due to the small housing and large number of LEDs you cannot observe the LEDs failing as there is still some light coming out, albeit diminishing rapidly, unable to verify compliance with ASTM E3022 and consequently NADCAP checklists. ASTM E3022 requires that critical components such as failed LEDs be replaced before use.

WARNING!USE OF UV LIGHTS CAN CAUSE HARM TO YOUR EYES AND SKIN, PROTECT YOURSELF AGAINST UV.

Download our 2024 Catalog

How to stay in compliance with pledged standards

    MB 3.0 Series UV LED light

    This compact light is simply Genius! A combination of smart mechanics and efficient electronics, designed to survive extreme temperatures and harsh working conditions, 24x7. Penetrant resistant and certified with an ingress protection marking of IP68 Waterproof.

    There are four MB 3.0 Series models, Zeus, Hermes, Selene and Atlas. Depending on the model, the beam diameter is 8-9 inches / 20-22 cm and with intensities that vary from ≈ 4 000 to 9 000 μW/cm2. Zeus and Selene are equipped with a strong white light as well. Spray can holder accessory Athena is available factory installed or as a later addition (PN: A503). 

    VIEW MB 3.0 SERIES VIDEO

    Selected models have been tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001. Battery running times are up to 3.5 hours.

    NDT Technicians, members of NATO military should ask for MB 3.0 Atlas (PN for AC powered: L125, PN for Battery powered: L124). MB 3.0 Atlas battery with Athena spray can holder attached carries PN: L126.

    Your choice from the top right menu complies with:

    Read More

    Inspector KITs for NDT

    The ultimate inspector kit, "Stockholm" (PN: K001) to carry field inspections in a professional and reliable manner. All UV lights included are tested and certified to comply with ASTM E3022-18.

    Stockholm kit (PN: K001) includes 3 highly durable UV lights and 1 UV and White Light meter:

    (a) MB 3.0 Zeus handheld UV light with Athena spray can holder - PN: L122;

    (b) UVG3 2.0 Midlight UV Flashlight - PN: L135;

    (c) UVG5 2.0 Midlight UV Headlight - PN: L128;

    (d) Apollo 3.0 UV and White Light meter - PN: M505.

    VIEW INSPECTOR KIT VIDEO

    UV lights in the standard kit can be replaced with other models within the same series upon request. Selected UV models from each Series have been tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001.

    Members of the US military should ask for PN: K002 as it has been customized to meet USAF requirements.

    Three additional KITs are available, Gothenburg (PN: K003), Malmo (PN: K004) and Uppsala (PN: K005), if not all four units are required.  

    Read More

    BB 2.0 Series UV LED light

    Powerful, penetrant resistant and with an Ingress Protection 68 (IP68 Waterproof).

    Beam profile is the largest and smoothest than any other portable UV LED light on the market today. Depending on the BB 2.0 Series model (Ikaros, Helios, Artemis), the beam diameter is 10-11 inches / 26-28 cm and with intensities that vary from ≈ 4 000 to 22 000 μW/cm2.

    View BB 2.0 Series video

    Selected models have been tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001. Battery running times are up to 7 hours.

    Members of the US military should ask for BB 2.0 Helios (PN for AC powered: L1076, PN for Battery powered: L1077) or BB 2.0 Ikaros (PN for AC powered: L1074, PN for Battery powered: L1075).

    Your choice from the top right menu complies with:

    Read More

    MB 3.0 Iris UV LED light

    Certified with an ingress protection marking of IP68 Waterproof, MB 3.0 Iris is an extremely compact light. It is used together with automated systems that incorporate cameras to inspect hard to reach areas such as pipes interior or simply mount on a mag bench.

    The beam diameter is 9 inches / 23 cm generating an intensity of ≈ 4 000 μW/cm2 at 38 cm (15 inches).

    MB 3.0 Iris has been tested to comply with both ASTM E3022-18 and ISO 3059-12 standards as well as with the internal requirements of all PRIMES, including Rolls-Royce RRES 90061 and Airbus AITM6-1001. It comes as AC (Mains) powered only and it is supplied with a mounting bracket.

    Your choice from the top right menu complies with:

    Read More

    Hercules Ex UV LED light

    Designed upon request of the military, Hercules is probably the most durable and shockproof UV light in the world today, suitable for any "heavy duty" environment. Accidentally Dropped it, kicked it, run it over by a tank, baked it in an oven? - it will still work! - The battery is inside the light, you don't need to worry it got smashed like ordinary lights. In a tough environment such as non-destructive testing, you want the best NDT equipment possible to avoid disruptions. Six years after its introduction to market, Hercules Ex has a track record of ZERO failed LEDs.

    View Hercules Ex video

    Hercules Ex is the first and only UV inspection light on the market today with explosion proof approvals that complies with ASTM E3022-18 and all PRIMES requirements, including Rolls-Royce RRES 90061 and Airbus AITM6-1001.

    Labino is undergoing regular audits to maintain the explosion proof status of Hercules Ex. Our auditor on this product is Intertek. Hercules Ex ATEX certification number is ITS17ATEX402144X.

    How to identify fake EX products video

    If anyone offers you an explosion proof product, you should ask for

    (a) the certification number

    (b) who the auditor is

    and check its authenticity online (www.iecex-certs.com). Manufacturers are obligated to share this information in their marketing literature. All certificates can be retrieved online, on the auditors website. There are fake explosion proof products from China, some re-branded, without certifications, distributed in the USA and Europe today. Don´t take "trust me" for an answer. You do not want an uncertified product on an oil rig or a refinery.

    Members of the US military should ask for PN: L3000.  

    Read More