Flashlight and headlight UV LED Lights

Small, light and powerful, UVG3 2.0 Series and UVG2 2.0 Series UV LED flashlights are a convenient tool for quick inspections. UVG3 2.0 Series is in compliance with all major non-destructive testing standards such as ASTM E3022-18. Select models are also in compliance with PRIMES, such as Rolls-Royce RRES 90061 and AITM6-1001. UVG2 2.0 Series is suitable for applications such as leak detection, clean room.

UVG5 Series UV LED headlight is a compact and adjustable headlight that frees your hands during inspections. It is an extremely durable industrial design. UVG5 Series is in compliance with all major non-destructive testing standards such as ASTM E3022-18 and ISO 3059-12. Select models are also in compliance with PRIMES, such as Rolls-Royce RRES 90061 and AITM6-1001.

Please be advised that generic UV lights that have several UV LEDs mounted within a few millimeters from one another in a small housing create an excessive amount of heat which significantly shortens the life of the LEDs. Due to the small housing and large number of LEDs you cannot observe the LEDs failing as there is still some light coming out, albeit diminishing rapidly, unable to verify compliance with ASTM E3022 and consequently NADCAP checklists. ASTM E3022 requires that critical components such as failed LEDs be replaced before use.

WARNING! – USE OF UV LIGHTS CAN CAUSE HARM TO YOUR EYES AND SKIN, PROTECT YOURSELF AGAINST UV.

Download our 2024 Catalog

Download our 2024 Accessory List

How to stay in compliance with pledged standards

Inspector KITs for NDT

The ultimate inspector kit, "Stockholm" (PN: K001) to carry field inspections in a professional and reliable manner. All UV lights included are tested and certified to comply with ASTM E3022-18.

Stockholm kit (PN: K001) includes 3 highly durable UV lights and 1 UV and White Light meter:

(a) MB 3.0 Zeus handheld UV light with Athena spray can holder - PN: L122;

(b) UVG3 2.0 Midlight UV Flashlight - PN: L135;

(c) UVG5 2.0 Midlight UV Headlight - PN: L128;

(d) Apollo 3.0 UV and White Light meter - PN: M505.

VIEW INSPECTOR KIT VIDEO

UV lights in the standard kit can be replaced with other models within the same series upon request. Selected UV models from each Series have been tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001.

Members of the US military should ask for PN: K002 as it has been customized to meet USAF requirements.

Three additional KITs are available, Gothenburg (PN: K003), Malmo (PN: K004) and Uppsala (PN: K005), if not all four units are required.

UVG5 2.0 UV LED Headlight

UVG5 2.0 UV LED headlight is a compact and adjustable light that frees your hands during inspections, especially useful during yoke inspections or mag bench inspections. It is equipped with a white light block filter.

UVG5 2.0 is the most durable UV LED headlight in the world. It is as industrial as it gets. The beam profile is the largest and smoothest than any other UV headlight on the market today. Depending on the model, the beam diameter is 3-5 inches / 8-12 cm and with intensities that vary from ≈ 4 000 to 80 000 μW/cm2! VIEW UVG5 2.0 SERIES VIDEO

Select models have been tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001. Battery run time 8-14 hours (continuous) depending on the model. It comes with an acoustic battery indicator that signals the battery time left. All models can be re-charged fully, within 3 hours, without removing batteries.

Members of the US military should ask for UVG5 2.0 Midlight (PN: L129) – NATO STOCK NUMBER (NSN): 6230640020947.

Your choice from the top right menu complies with:

UVG3 2.0 UV LED flashlight

Powerful, penetrant resistant UV LED flashlight and with an Ingress Protection 68 (IP68 Waterproof). Ideal for inspectors to carry on the NDT floor for quick inspections. This is an extremely light and compact UV LED lamp.

The beam profile is the largest and smoothest than any other UV LED flashlight on the market today. Depending on the model, the beam diameter is 3-5 inches / 8-12 cm and with intensities that vary from ≈ 4 000 to 90 000 μW/cm2!

Selected models have been tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001. Battery running times are up to 8 hours.

NDT Technicians, members of NATO military should ask for UVG3 2.0 Midlight (PN: L135) - NATO STOCK NUMBER (NSN): 6230226200609. The Double kit (two UVG3 2.0 Midlights included) is PN: L1086.

Your choice from the top right menu complies with:

UVG2 2.0 UV LED flashlight

Powerful, penetrant resistant UV LED flashlight and with an Ingress Protection 68 (IP68 Waterproof). Ideal for leak testing inspectors, forensic inspectors to carry on their belt for quick inspections. This is an extremely light and compact UV LED lamp. Battery running times are up to 8 hours.

The beam profile is the largest and smoothest than any other UV LED flashlight on the market today. Depending on the model, the beam diameter is 3-4 inches / 8-10 cm and with intensities that vary from ≈ 18 000 to 90 000 μW/cm2!

Members of the US military should ask for UVG3 2.0 Midlight (PN: L135) - NATO STOCK NUMBER (NSN): 6230226200609. The Double kit (two UVG3 2.0 Midlights included) is PN: L1086.